Americas 
SELECT CATEGORY
BLASTING
A model GSX16 on steel shot blasting for TEREX in South Dakota, USA. Includes a Stinger explosion isolation valve, angled explosion vent & self-dumping hopper.
GSX84 dust collector on abrasive blasting in Washington, USA. The unit includes an integrated safe monitoring filter and explosion venting.
GS20 on Aluminum Shot Blasting
GS96 on a Blast Booth at a Military Installation
GS96 on a Blast Booth at a Military Installation
GS96 on a Blast Booth at a Military Installation
Model GS12 on Metal Shot Blasting
GS96 successfully handling foundry sand containing lead and other metals.
GS6 on shot blasting application at Brewton Iron Works.
Four Gold Series dust collectors on a blasting application at ASC.
Gold Series GS8 on a shot blasting application at Crown Equipment.
Gold Series GS10 and GS6 on abrasive blasting and recovery at Hardi Australia.
GS32 on a blasting application at Bisalloy Steel.
CHEMICAL PROCESSING
Stainless Steel GS6 collecting extremely fine pigment powder
GS16 on Fumed Zinc Oxide at United Precious Metals
GS32 on Plastic Dust
GS24 on Regenerative Thermal Oxidizers at Crown, Cork and Seal
GS16 on Plastic Powder Mixing at General Cable
Stainless steel GS6 units Extremely Fine Pigment Powder
GS32 on Silica Fines and Flakes at Munters, Inc.
GS6 on Powder Mixing at Technic, Inc.
GS72 on Magnesium Oxide, a fire retardant agent
GS10 at Amway Global
Gold Series at Entek International
Gold Series GS16 on potassium sulfate
A Gold Series GS36 industrial dust collector on resin dust at OMNOVA Solutions
FIBERGLASS/FRP
Gold Series GSX36 on fiberglass sanding with Stinger explosion isolation device, explosion vent and self-dumping hopper at TEREX in South Dakota, USA.
GS48 on Chopped Fiberglass at Johns Manville International
Another GS48 on Chopped Fiberglass
GS32 on PVC Dust at Advanced Trim Works
GS12 unit on Foam Mold Process at Bridgestone APM
Model GS32 on Hay Press Processing at Ward Rugh, Inc.
FINE POWDER
GS36 on Masonry Dust
GS16 with Safety Monitoring Filter on Powdered Cosmetics
GS12 and High Vacuum 4HV on Toner Cartridge Dust
Gold Series GS40 installed at Tri-Gemini on a fine powder application.
FOOD PROCESSING
Gold Series X-Flo GSX2 on sugar extraction in a candy manufacturing line.
Stainless Steel GS4 on Powdered Food Ingredients at Maruchan, Inc.
Gold Series GS24 at Nestlé Prepared Foods Company.
GS16 on a Pastry Food application
Gold Series GS12SQ on a food processing application at Midwest PMS
Three GS8 units on sugar blending for chewing gum manufacturing.
LASER AND PLASMA
GS24 on Plasma Cutting Table at E&E Metal Fab, Inc.
GS20 on Plasma Cutting at Fisher Snow Plow
GS10 on accu-kut plasma table
GS16 on Plasma Cutting
GS16 on Laser Cutting Application
GS4 on Laser Cutting Fumes, Connected to a Zipper Duct
GS8 on Plasma Cutting
GS16SQ on a Plasma Table Cutting Aluminum
GS8 on a Plasma Table application
GS32 on Plasma Cutting at Trail King Industries
Gold Series GS20 Industrial Dust Collector on a Plasma Cutter
GS4 on a Plasma Cutting Operation at Kawasaki
Gold Series GS24 installed at Chatham Steel on a plasma cutting table application.
GS24 on Steel Shot and Grit Abrasive Manufacturing
METAL WORKING
GS12 with Low Boy hopper handling grinding and welding operations in Norway.
GS32 on Fumes from Metal Scrap Processing at Enviro-Chem
GS36 on Grinding, Buffing, Polishing Carbon Steel at Western Forg
GS108 on Heavy Torch Cutting of Sheet Metal at Brandenburg Industrial
GS12 collecting Platinum Dust in a recycling process
GS20 dust collector installed at Masterloy Products Company
Gold Series GS108 Collecting Sand on a Metal Working Application
Two GS96 units at a Nickel Mine
MINING
A Gold Series GS36/30 unit at a copper mine in Chile
Gold Series Dust Collector Operating at a Conveyor to Conveyor Transfer Station
Two GS96 Units at a Nickel Mine
Gold Series Capturing Fugitive Dust Over a Conveyor
Gold Series units on crushing copper ore
Gold Series on a mining mill conveyor transfer point
Coarse Ore Storage Bin Vents
GS72 on a Copper Mine Crushing Line
GS72 on a Copper Mine Crushing Line
PAPER SCRAP
A GSX12 with a Stinger explosion isolation valve and cut-off drums handling paper dust in Ohio, USA.
Customer Uses View Port to Inspect Hopper on GS16 on Paper Dust at Trader Publishing
GS108 on Corrugated Box Dust at Packaging Corp of America
GS84 on Paper Trim Scrap
GS2 used as a bin vent
GS48 on paper trim and dust from a shredder
GS144 on Printer Paper Trim and Dust
A Gold Series GS64 on corrugated paper and cardboard in Canada.
PHARMACEUTICAL
A GSX10 with low boy hopper, chemical explosion suppression, integrated touch screen control and 30 HP fan on a pharmaceutical housekeeping application in Minnesota, USA.
Two GS60 Units on Powdered Dust at a Vitamin Manufacturer
GS8 Camatin Bag In Bag Out Unit on a Pharmaceutical Application
Multiple GS Camtain units on a pharmaceutical application
Gold Series Camtain Continuous Liner Containment System
Gold Series Camtain Dust Collector with Bag In Bag Out Safe Change Filter System
Another Proper Application and Installation of the Gold Series Camtain
Two Gold Series Camtain CGS6 Models on a Pharmaceutical Application in Guayama, P.R.
Two GS8 collectors at BOSCH Manesty
CGS2 on Pharmaceutical Dust and General Suction from Several Hoods
A Gold Series GSC2 Camtain System in a Cleanroom Application
A Gold Series GSC2 on a Pharmaceutical Application in Spain
Three Gold Series GSC2 Camtain Dust Collectors on a Pharmaceutical Application
RECYCLING
GS32 working on paper and glass dust
A GS36 hard at work in the snow on a paper, glass, wood, and plastic recycling application.
RUBBER GRINDING
Three GS12 Units on Rubber Grinding
Gold Series Units and Cyclones on Rubber Automotive Belt and Tire Grinding at Dayco Automotive
SANDING
Multiple Gold Series Modules on Stone Sanding at Indiana Limestone Co., Inc.
Gold Series Booth GSB 16-7 on Marble and Stone Finishing at Natural Stone Concepts
Gold Series Booth Model GSB6 on a Sanding Application at Sink Factory, Inc.
SEED PROCESSING
GS12 and Two GS20 Units on Fugitive Dust from Corn Seed Processing at Pioneer Hi-Bred
GS16 on seed processing at Mycogen
GS32 on Corn Shelling
Gold Series Dust Collectors at Pioneer Hi-Bred
GS24 on dust from a corn sheller and cleaner
SOLAR PANEL FABRICATION
GS24 Units on a Solar Panel Manufacturer in Massachusetts, USA
GS24 on dust from a corn sheller and cleaner
THERMAL FLAME SPRAY
3 GS16 units working on a thermal spray process
GSX16 with explosion vent working on a thermal spray application.
GSX64 with variable frequency drive on a thermal spray application.
GS32 on a thermal spray application
GS24 on a HVOF Thermal Spray application
Two GS40 models on a thermal spray application
Two GS32 models on Thermal Spray at Vishay Components
A GS36, GS48, and GS60 on a thermal spray application.
A GS12S and GS48 on a Thermal Spray Application at Impreglon
WELDING
GS24 working on ambient weld fumes with an integrated safety monitoring filter in North Carolina, USA.
GSX6 with low boy hopper, integrated safety monitoring filter, silencer and variable frequency drive running at 7700 CFM on a robotic welding operation in Illinois, USA.
Model GSX4 on robotic welding fumes with a fan silencer, variable frequency drive, integrated safety monitoring filter, platform and ladder, and leg extension. Installed in Illinois, USA.
Gold Series X-Flo GSX24 on ambient welding.
GS40 on a welding application at Waconia Manufacturing
GS48 on Welding Fume at Camfil APC High Bay Plant
GS48 on Auto Welding Smoke at Nissan North America, Inc.
GS32 on Plasma Welding
GS32 on Plasma Welding
GS48 on Auto Welding Smoke at Nissan North America, Inc.
GS32 on Plasma Welding
GS72 on Welding Smoke at Nissan North America, Inc.
Two GS12 Dust Collectors on a Welding Application at Toyo Seat, USA
Two GS12 Dust Collectors on a Welding Application at Toyo Seat, USA
GS20L Special on Combined Ambient and Source Welding Fume
Gold Series GS6 on a welding application.
GS40 on a welding application at Waconia Manufacturing
GS16 on Robotic Welding Fume at Reinke Manufacturing
A GS12 on a welding application.
WOODWORKING
GS12 on Woodworking
GS8 on Woodworking at Wood Technology
GS16 on Woodworking at Vigilant Inc
GS16 on Woodworking at Weitco Stair Products
GS48 on Wood Finish Sanding at New England Wood Craft
GS16 Collecting MDF, Plywood and Particle Board Dust on a Woodworking Application
Twin GS16 units on a Woodworking application
GS48L on Woodworking
OTHER APPLICATIONS
Gold Series GSX20 running at 19000 CFM on paper and plastic in a mask manufacturing application. Includes a custom platform/ladder, acoustical cladding for the fan, rotary airlock and explosion vent.
GSX16 model with Low Boy hopper working on general nuisance dust from a warehouse.
A GS2 unit handling dry concrete dust
